Tuesday, November 20, 2012

latest exhaust bits

Exhaust is pretty much done, at least for now. The flange at the header end will be welded on once the engine is in the car.

I added some stainless bungs for O2 sensors to help with tuning.

There are 4 mounts to the body, with 10mm stainless hangers and polyurethane isolators. I braced the floor with plates welded to the body and welded 10mm nuts to the other side to make mounting and adjusting the exhaust easy. The stainless plate on the hanger has a bunch of adjustment possible. The rubbers are pretty solid, you don't get much movement yanking on the exhaust, so should be good to go.

This is one of the brackets for the rear mounts near the end of the exhaust. Again there's captive nuts welded on and hanger brackets with adjustment.

The mild steel tail pipes got sandblasted and will be sprayed with black high-temp paint.

2 comments:

  1. Zhejiang Yaang Pipe Industry Co., Limited is a leading manufacturer and supplier of nickel alloy and stainless steel products, including Super Duplex Stainless Steel Flanges, Stainless Steel Flanges, Stainless Steel Pipe Fittings, Stainless Steel Pipe - contact us today for more information!

    ReplyDelete
    Replies
    1. saya atas nama BPK. SAMSUL dari MADURA ingin mengucapkan banyak kasih kepada MBAH KARYO,kalau bukan karna bantuannya munkin sekaran saya sudah terlantar dan tidak pernaah terpikirkan oleh saya kalau saya sdh bisa sesukses ini dan saya tdk menyanka klau MBAH KARYO bisa sehebat ini menembuskan semua no,,jika anda ingin seperti saya silahkan hubungi MBAH KARYO no ini 082301536999 saya yakin anda tdk akan pernah menyesal klau sudah berhubungan dgn MBAH KARYO dan jgn percaya klau ada yg menggunakan pesan ini klau bukan nama BPK. SAMSUL dan bukan nama MBAH KARYO krna itu cuma palsu.m



      Delete