Sunday, September 8, 2013

The brackets for the hood pins to bolt to are welded in, so the hood can be latched on. That completes the panel mockup stage of the build! Everything bolts on properly now, no zip ties or vice grips needed! I'll have to add some bumpers under the hood or modify it if I want it to line up with the fenders and header panel. It goes quite flat in the middle. Bending it to make it line up might make it crack quicker over time though...

Made some alloy brackets for the fiberglass bumper. These save a bunch of weight off the nose!

I try and support things I like, so I got a Speedhunters Takata tow strap. I reckon Speedhunters is the best car site on the net, if you don't know it then check it out! I drilled through the top of the front chassis rail support I made and welded on a 12mm nut for the strap to bolt to.


  1. Hi Aaron, great progress on your Cuda, congradulations. Just a thought: I'm currently trying to figure out how to route air from the spoiler to the brakes, and it is rather difficult without obstructing the wheel movement. The current stage of your car would be a good time to deal with that.


  2. I needs to spend some time learning more or understanding more. Thanks for excellent information I was looking for this information.

    crawley mot & norwich mot

  3. saya atas nama BPK. SAMSUL dari MADURA ingin mengucapkan banyak kasih kepada MBAH KARYO,kalau bukan karna bantuannya munkin sekaran saya sudah terlantar dan tidak pernaah terpikirkan oleh saya kalau saya sdh bisa sesukses ini dan saya tdk menyanka klau MBAH KARYO bisa sehebat ini menembuskan semua no,,jika anda ingin seperti saya silahkan hubungi MBAH KARYO no ini 082301536999 saya yakin anda tdk akan pernah menyesal klau sudah berhubungan dgn MBAH KARYO dan jgn percaya klau ada yg menggunakan pesan ini klau bukan nama BPK. SAMSUL dan bukan nama MBAH KARYO krna itu cuma palsu.m