Pages

Sunday, November 9, 2014

Spray booth and work

Here's the spray booth I've made to keep fumes and dust out of the house, and also to ensure a dry and warm environment for prepping and painting the body. The plastic sheet booth is sealed all around and has 4000cfm of filtered intake and exhaust ventilation. Works great! It's nice and warm and dry in there.

I've been stripping and priming the new body panels as there was quite a few tendrils of rust under the factory e-coating, mainly on the roof but a little on the quarters too. Not ideal as the e-coat is advertised as a solid basis for paint. So I stripped and deoxydine treated the panels and sprayed them with PPG expoxy urethane primer to ensure a long life to the body and paint.


Clean! Next up is filling the seams between the new panels, then painting the whole body and getting the thing off the rotisserie for the last time. Can't wait!

8 comments:

  1. Interesting blog. This is one of my favorite blog also I want you to update more post like this. Thanks for sharing this article.
    Car service Chennai

    ReplyDelete
  2. So uh, how much you want for this car again once you're down building it for me?

    ReplyDelete
  3. Thanks so much for sharing. I get relavant information from your post.
    Airless Spray Gun

    ReplyDelete
  4. saya atas nama BPK. SAMSUL dari MADURA ingin mengucapkan banyak kasih kepada MBAH KARYO,kalau bukan karna bantuannya munkin sekaran saya sudah terlantar dan tidak pernaah terpikirkan oleh saya kalau saya sdh bisa sesukses ini dan saya tdk menyanka klau MBAH KARYO bisa sehebat ini menembuskan semua no,,jika anda ingin seperti saya silahkan hubungi MBAH KARYO no ini 082301536999 saya yakin anda tdk akan pernah menyesal klau sudah berhubungan dgn MBAH KARYO dan jgn percaya klau ada yg menggunakan pesan ini klau bukan nama BPK. SAMSUL dan bukan nama MBAH KARYO krna itu cuma palsu.m



    ReplyDelete
  5. Content of this blog looks very informative. We are the manufacturers & exporters of Spray Booth in India

    ReplyDelete