The deck lid on my car was far from perfect, so I thought I'd experiment with some lightening. I drilled the hinges... And the und...

I relocated the trunk lock to clean up the tail panel. First the stamped key section got cut out... and the hole filled in. Then t...

Used this sweet little tool to roll the rear wheel lips. This along with the outer wheel house tubs I made allow good clearance for fatty ...

Dressing up the old fish bones. First time seeing it with all its panels, spoilers (cardboard rear one), and wheels etc...   Looked pr...

Welded the roof on today, and that was the last panel to put on, so I have a complete shell now! First the drip rails were aligned and wel...

Lots of little jobs the last couple of days, in between fitting the quarters and the roof. The part above is one of the trunk gutters and ...

One last look at the quarter-less car...    Today I finally welded and glued the quarter panels on. I should have taken note of how many t...

The bottom corners of both doors needed some repairs. They had average old rust repairs, and rusty frames underneath. I cut the rusty ...

Time to fill the side marker light holes on the rear quarters, before they get welded to the car.  First up I cut the stamped sectio...

Still nice to see the shape of the car again, these cuda's sure are good lookin.

I was feeling a bit out of my depth fitting all the new panels and trying to work out where to start and what to start with. Nothing fits ...

Everything seems to roughly fit pretty well, but holy shit it's going to be lot of work to get everything straight and even!

Rebuilt the hinges in preparation of hanging the doors as part of the first test fit of all the new body panels. Dismantled, sandblasted...