Still nice to see the shape of the car again, these cuda's sure are good lookin.

I was feeling a bit out of my depth fitting all the new panels and trying to work out where to start and what to start with. Nothing fits ...

Everything seems to roughly fit pretty well, but holy shit it's going to be lot of work to get everything straight and even!

Rebuilt the hinges in preparation of hanging the doors as part of the first test fit of all the new body panels. Dismantled, sandblasted...

I've patched up the rusty bits that the sandblasting exposed. The upper door hinge/A-pillar sections on both sides needed to be repair...

Here's a little timelapse video I shot while painting the car yesterday. I put 4 coats of paint on (only one coat shown in the video,...

Urethane seam sealed the various seams, welds, and repairs, inside and out. Not a very fun job! But vital for long term rust prevention. ...

Here's the car as it looked yesterday morning, strapped to a truck, on it's way to the sandblasters . The weather wasn't look...

Just got the shell back from the dip strippers, and it's nice and clean. The stripping process also removed all the panel bond that ha...

Finished the routing and mounting of the fuel line, hand brake cables, and brake line. I've welded nuts onto the body to allow easy at...

Playing around with another little clip I shot from when I first had the motor running with open headers. Sure be nice to hear the thrott...

My car is now 40 years old, could 2013 be the year of the barracuda? Here's hoping! I've been in holiday m...

Final fit up of the complete exhaust. With all the mounts in place it is very sturdy, and has almost no movement when you yank on it. ...

Exhaust is pretty much done, at least for now. The flange at the header end will be welded on once the engine is in the car. I added s...

Finally got a chance to edit some footage I shot from a road trip back in 2010. Music: 'Oh Fair Moonlight' by Fly My Pretties.

Welded on the water-jet cut stainless flanges. The colours came out prettily.

TIG welded the tube work of the exhaust. I love stainless...   leave it bare and it won't rust! And welds will stay colourfull. I ...

Made some room for the new handbrake setup and exhaust. Starting to work out the cable routing... Made some mounts for a drives...

Tube work finished! Ready for the final weld up with flanges and hangers. The tips will be done once the car is complete as I plan on m...

 Continuing with the x-pipe fabrication. Today's work was the dump pipes. I got the 3" pipes butting up nicely with the 3.5...

Work is progressing slowly on the exhaust fabrication work. I want to tuck it all up as much as possible for ground clearance, and it take...