Made an exhaust/muffler system for the engine/cam break-in on the stand. You void the warranty on TTI headers if you run them on break-in (a...

I've tidied up my garage so I can finish the car there, Weta Workshop is currently too packed with orcs and robots to fit an old muscle ...

Coming together...  Parts back from powdercoaters, suspension mockup, valve cover modification, custom fitted plug leads. Hotchkis upper c...

Here's what I'm thinking for a future colour scheme for the car. The body is all flat black apart from the rear quarter, door, and c...

Made a little bracket for the dipstick, this sort of thing is fun to do. I'm also happy with the plug lead routing, I made brackets that...

Welded up the rollbar, a most enjoyable day at work! Such pretty colours! Not bad for my first TIG welding project. It even fits, bon...

Modifying the intake. Here's the stock Edelbrock Performer RPM dual-plane intake. The heads in my 440 have been quite heavily ported. ...

Concept image of the Kuda. Here's the original photo .

Finished fabricating the drivetrain dolley / engine run stand. Now to finish the motor, wire it up, and run it in! Big thanks to Weta for p...

Working on the drivetrain dolly. The K member bolts on via the sway bar mounts, and the engine, bellhousing, and gearbox fit up so you can w...

Concept image of the Kuda with the fiberglass hood off. The hood will be secured via four Aerocatch fasteners, and I'll be putting two ...

Reinforcing the lower control arms. First up they got stripped of bushings and bump stops, then sand blasted clean. Reinforcing plates fro...

Test fitting the K member on the motor.

Test fitting the new fiberglass fenders and hood along with the new wheels and tires. The fenders fit better than I was expecting from race-...

Installing the new Milodon road race oil pan, a very nice part. Windage tray and pickup. Reinforcing the factory K member. The skid pla...

I made a jig so I could work on the rollbar while the car is away from the workshop. Makes a tricky job a little easier, notching tubes can ...